Suzuki WagonR+ RB310 Service Manual page 2295

5B-4 FRONT BRAKE
FRONT DISC BRAKE PAD
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper pin bolts (1).
3) Remove E-ring from strut and then remove caliper (1) from cali-
per carrier.
NOTE:
Hang removed caliper with a wire hook (2) or the like so as
to prevent brake hose from bending and twisting exces-
sively or being pulled. Don't operate brake pedal with pads
removed.
4) Remove pads (3).
INSPECTION
Brake Pad
Check pad lining for wear. When wear exceeds limit, replace with
new one.
CAUTION:
Never polish pad lining with sandpaper. If lining is polished
with sandpaper, hard particles of sandpaper will be depos-
ited in lining and may damage disc. When pad lining re-
quires correction, replace it with a new one.
Pad thickness (lining + rim) "a"
Standard : 15.3 mm (0.60 in.)
Service limit : 8.2 mm (0.32 in.)
NOTE:
When pads are removed, visually inspect caliper for brake
fluid leak. Correct leaky point, if any.