6H-14 CHARGING SYSTEM
DISASSEMBLY
1. Pulley nut
2. Pulley
3. Bolt
4. Bolt
5. Front housing
6. Bearing
7. Retainer
8. Spacer
9. Rotor
10. Stator
1) For easier reinstallation, provide match marks (1) on front hous-
ing (2) and rear housing (3) as shown before separating them.
2) Remove housing bolts (1) from generator.
11. IC regulator
12. Brush:
Note the installing direction,
and the detail refer to page 6H-19.
13. Rectifier
14. IC regulator assembly
15. Rear housing
16. "B" terminal
17. "B" terminal nut