BACK TO CHAPTER INDEX
Lighting
Callout
Rear License Plate Lamp Screw (Qty: 2)
Caution:
Refer to
1
Tighten
3 N·m (27 lb in)
Rear License Plate Lamp
2
Tip
Rotate the left corner of the lamp assembly upward and pull the right side down out from the rear bumper fascia opening.
Rear License Plate Lamp Socket
3
Tip
Rotate the lamp socket counterclockwise and remove.
Rear License Plate Lamp Bulb
4
Tip
Service the bulb, as needed.
Fastener Caution
in the Preface section.
BODY SY S T E M S
Component Name
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX