Chevrolet Cruze 2012 Manual page 1564

BACK TO MAIN INDEX
Removal Procedure
1. Turn on the radio and record all of the customer radio station presets.
2. Ensure that all lamps and accessories are turned off.
3. Turn the ignition OFF and remove the ignition key.
Warning: Refer to
4. Loosen the negative battery cable nut (2).
5. Remove the negative battery cable (1) from the battery.
Installation Procedure
1. Install the negative battery cable (1) to the battery.
Caution: Refer to
2. Fasten the negative battery cable nut (2) and tighten the nut to 4 N·m (35 lb in).
3. Insert the ignition key and turn the ignition to the ON position.
4. Program volatile memory. Refer to
5. Program all of the customer's radio station presets and set the radio clock to the current time.
Battery Disconnect Warning
Fastener Caution in the Preface section.
Volatile Memory Programming.
ADDITIONAL LINKS
in the Preface section.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 00
TO MODEL INDEX