Chevrolet Cruze 2012 Manual page 1488

BACK TO CHAPTER INDEX
Rear Suspension
Special Tools
• CH 6616 Hydraulic Hand Pump
• CH 6615-10 Hydraulic Cylinder
• CH-48377-1 Chisel
• CH-49233 Adapter
• CH 906-42 Adapter
For equivalent regional tools. Refer to
Removal Procedure
Warning: Use of eye goggles is necessary to prevent personal injury.
1. Remove the rear axle. Refer to
2. With the aid of second mechanic, place rear axle onto work bench.
3. Mark installation position (dashed line) for rear axle bushing (2) on rear axle using a permanent marker.
Use upper gap (1) of bushing for alignment.
4. Drill 8 times all around through rubber (1) bushings with drill 10 mm (0.4 in)
SUSPENSION
Special Tools
Rear Axle Replacement
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
TO MODEL INDEX