Chevrolet Cruze 2012 Manual page 1337

BACK TO CHAPTER INDEX
Seat Hardware,Trim and Upholstery
1. Install front seat back cushion pad (2).
2. Install front seat back cushion cover (1).
• Install cushion cover (1) to Velcro.
• Attach cushion cover to frame (3).
3. Install cushion cover (1) to backside.
• Install cushion covering all the way around.
• Close 2 zippers on backside.
4. Install backrest.
Caution: Refer to
5. Install the front seat backrest bolts (2) and tighten to 35 N·m (26 lb ft).
6. Connect and latch wiring harness plug (1), if equipped.
7. Attach cushion cover to backrest below.
8. Install front seat head restraint guide. Refer to
9. Install seat cushion outer trim panel. Refer to
10. Install seat cushion inner trim panel. Refer to
11. Install front seat recliner handle. Refer to
12. Install front seat adjuster handle, if equipped.
13. Install driver or passenger seat. Refer to
Fastener Caution in the Preface section.
Front Seat Head Restraint Guide
Front Seat Cushion Outer Trim Panel
Front Seat Cushion Inner Trim Panel
Driver or Passenger Seat Recliner Handle
Driver or Passenger Seat
SEATS
Replacement.
Replacement.
Replacement.
Replacement.
Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 07
TO MODEL INDEX