Chevrolet Cruze 2012 Manual page 1566

BACK TO MAIN INDEX
Removal Procedure
Warning: Refer to Hot Exhaust System Warning
Warning: Refer to Protective Goggles and Glove Warning
1. Open the hood.
2. Raise the vehicle by its full height. Refer to
3. Remove the heated oxygen sensor (1).
4. Remove the 4 exhaust flexible pipe bracket bolts (5).
5. Remove the 3 exhaust flexible pipe nuts (8).
6. Remove the 2 exhaust flexible pipe nuts (3).
7. Remove the exhaust flexible pipe (7).
8. Remove the gasket (9).
9. Remove the gasket (4).
Installation Procedure
1. Install a NEW gasket (4).
2. Install a NEW gasket (9).
3. Install the exhaust flexible pipe (7).
Caution: Refer to
4. Install 2 NEW exhaust flexible pipe nuts (3) and tighten to 20 N·m(15 lb ft).
5. Install 3 NEW exhaust flexible pipe nuts (8) and tighten to 20 N·m(15 lb ft).
6. Install the 4 exhaust flexible pipe bracket bolts (5) and tighten to 40 N·m(30 lb ft).
7. Install the heated oxygen sensor (1) and tighten to 40 N·m(30 lb ft).
8. Lower the vehicle by its full height.
9. Close the hood.
in the Preface section.
Lifting and Jacking the
Fastener Caution in the Preface section.
ADDITIONAL LINKS
in the Preface section.
Vehicle.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 00
TO MODEL INDEX