BACK TO CHAPTER INDEX
Collision Repair
12.
Spot weld accordingly.
13.
To create a solid braze with minimum heat distortion, make 25 mm (1 in) stitch brazes along the seam with 25 mm (1 in) gaps
between them. Then go back and complete the stitch braze.
14.
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
15.
Paint the repaired area. Refer to
16.
Install all related panels and components.
17.
Connect the negative battery cable. Refer to
18.
Enable the SIR system. Refer to
BODY REPAIR
Basecoat/Clearcoat Paint
Systems.
Battery Negative Cable Disconnection and
SIR Disabling and
Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Anti-Corrosion Treatment and
Connection.
TO MODEL INDEX
S e c tion 03
Repair.