Chevrolet Cruze 2012 Manual page 1420

BACK TO CHAPTER INDEX
Power Steering
Removal Procedure
1. Remove front bumper fascia. Refer to
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.
4. Remove power steering gear inlet hose bolt (1).
5. Remove inlet hose (3) from clip (2).
6. Unscrew hollow screw (1).
7. Remove gasket (2).
8. Remove inlet pipe (3) from power steering pump.
9. Unscrew 3 bracket nuts (1).
10. Remove power steering gear inlet pipe (2) from vehicle.
11. Extract the steering gear oil seal from the steering gear.
Installation Procedure
STEERING
Front Bumper Fascia Replacement
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 09
TO MODEL INDEX