Chevrolet Cruze 2012 Manual page 908

BACK TO CHAPTER INDEX
Collision Repair
8. Remove the remaining parts of the front bumper impact bar.
Installation Procedure
1. Position the front bumper impact bar on the vehicle.
Caution: Refer to
2. Install the 8 front bumper impact bar bolts (1) and tighten to 110 N·m (81 lb ft).
Note: Use only the original front bumper impact bar bolts. Replace bolts if damaged.
3. Paint the repaired area. Refer to
4. Install all related panels and components.
5. Connect the negative battery cable. Refer to
6. Enable the SIR system. Refer to
Fastener Caution in the Preface section.
Basecoat/Clearcoat Paint
Battery Negative Cable Disconnection and
SIR Disabling and
BODY REPAIR
Systems.
Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Connection.
TO MODEL INDEX
S e c tion 03