Chevrolet Cruze 2012 Manual page 1543

BACK TO CHAPTER INDEX
Heating, Ventilation and Air Conditioning
1. Install condenser.
2. Install A/C refrigerant pressure sensor. Refer to
Caution: Refer to
3. Install condenser hose (1, 2) and condenser hose bolt and tighten to 19 N·m (15 lb ft).
4. Install A/C compressor and condenser hose to condenser. Refer to
5. Install radiator support. Refer to
6. Install air intake duct (1).
7. Install front bumper fascia. Refer to
8. Connect battery negative cable. Refer to
9. Evacuate and charge the refrigerant system. Refer to
Fastener Caution in the Preface section.
Radiator Support
Front Bumper Fascia
Battery Negative Cable Disconnection and
HVAC SYSTEM
Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement.
Air Conditioning Compressor and Condenser Hose
Replacement.
Replacement.
Refrigerant Recovery and
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Connection.
Recharging.
TO MODEL INDEX
S e c tion 10
Replacement.