Chevrolet Cruze 2012 Manual page 1011

BACK TO CHAPTER INDEX
Collision Repair
4. Clean and prepare the attaching surfaces for spot welding and brazing.
5. Position the body lock pillar outer panel reinforcement on the vehicle.
6. Verify the fit of the body lock pillar outer panel reinforcement.
7. Clamp the body lock pillar outer panel reinforcement into position.
8. Braze accordingly.
9. Spot weld accordingly.
10. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
11. Paint the repaired area. Refer to
12. Install all related panels and components.
13. Connect the negative battery cable. Refer to
14. Enable the SIR system. Refer to
BODY REPAIR
Basecoat/Clearcoat Paint Systems.
Battery Negative Cable Disconnection and
SIR Disabling and Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Anti-Corrosion Treatment and
Connection.
TO MODEL INDEX
S e c tion 03
Repair.