BACK TO CHAPTER INDEX
Seat Hardware,Trim and Upholstery
1.
Perform the front seat track synchronization. Refer to
2.
Install the front seat (4) to the guide in front.
3.
Connect and latch the wiring harness plug (3) front seat.
4.
Connect the wiring harness plug (2) from the belt buckle.
Caution:
Refer to
5.
Tighten the 2 bolts (1).
Tighten
45 N·m (33 lb in)
6.
Install the seat belt (3) to the front seat.
7.
Tighten the bolt (2).
Tighten
9 N·m (80 lb in)
8.
Install the front seat outer recliner upper finish cover (1).
9.
Enable the SIR system. Refer to
Fastener Caution
in the Preface section.
SIR Disabling and
SEATS
Front Seat Track
Synchronization.
Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 07
TO MODEL INDEX