Chevrolet Cruze 2012 Manual page 1582

BACK TO MAIN INDEX
2. Release tension to the tensioner at projection (1) counterclockwise.
Note: Allow tensioner to slide back slowly.
3. Remove EN 6349 pin (2).
4. Apply tension to the tensioner at projection (1) clockwise.
5. Install the front compartment splash shield. Refer to
6. Lower the vehicle by its full height.
7. Install the power steering pump belt. Refer to
8. Close the hood.
ADDITIONAL LINKS
Front Compartment Splash Shield
Power Steering Pump Belt Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Replacement.
TO MODEL INDEX
S e c tion 00