BACK TO CHAPTER INDEX
Frame and Underbody
Special Tools
• CH 904 Underframe
• CH 49289 Centering Adapter
For equivalent regional tools, refer to
Removal Procedure
1.
Support the radiator and condenser from above using the condenser tabs on each side.
2.
Remove the lower steering intermediate shaft bolt (1).
3.
Raise the vehicle on a hoist. Refer to
4.
Remove the tire and wheel assemblies. Refer to
5.
Remove the exhaust flexible pipe. Refer to
6.
Remove the front compartment splash shield. Refer to
7.
Remove the front compartment insulator, if equipped. Refer to
8.
Remove the wheel speed sensor wiring harness (2) from the frame on both sides.
Remove the wiring harness retainers (3) from the frame and the lower control arm.
9.
Remove the radiator wiring harness (1) from the frame.
Remove the wiring harness retainers (4) from the frame.
BODY REPAIR
Special
Tools.
Lifting and Jacking the
Vehicle.
Tire and Wheel Removal and
Exhaust Flexible Pipe
Front Compartment Splash Shield
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Installation.
Replacement.
Replacement.
Front Compartment Insulator
S e c tion 03
Replacement.
TO MODEL INDEX