Chevrolet Cruze 2012 Manual page 1149

BACK TO CHAPTER INDEX
Fixed and Movable Windows
• Arrow shows the path taken by the cutting wire.
• Cut out the rear window until the cutting wire is level with the winch.
17. Place the winch with two winding heads in the vehicle.
Note: Ensure Check that the cutting wire is laid correctly to the winch deflection roller.
• Position winch in the middle area of rear window (2).
• Insert transfer ratchet and pre-tension cutting wire (1).
18. Cut out rear window.
• Cut out the rear window until the cutting wire is level with the winch.
• Arrow shows the path taken by the cutting wire.
19. Position the winch with one winding head in the vehicle.
Note: Ensure that the cutting wire is fitted correctly to the winch deflection roller.
• The winch with 2 winding heads (1) stays in the position.
• Position winch with one winding head (2) in the area of the lower C-pillar.
• Thread the second end of the wire (3).
• Insert transfer ratchet and pre-tension cutting wire.
20. Cut out rear window.
Note: Increased cutting effort is required in the area of the rear window radius.
• Cut out the rear window until the cutting wire is level with the winch.
• Arrow shows the path taken by the cutting wire.
BODY SYSTEMS
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX