Chevrolet Cruze 2012 Manual page 1139

BACK TO CHAPTER INDEX
Fixed and Movable Windows
Note: Ensure that the cutting wire is fitted correctly to the winch deflection roller.
14. Place the winch with two winding heads (2) in the vehicle.
• Position winch in right-hand area of the windshield.
• Attach the cutting wire to the winch.
• Insert transfer ratchet and pre-tension cutting wire.
Note: In the area of the A-pillar/front wall, increased cutting effort must be made.
15. Cut out windshield.
• Use the plastic sheet for the protection of the armature board.
• Arrow shows the path taken by the cutting wire (1).
• Cut out the windshield until the cutting wire is level with the winch.
Note: Ensure that the cutting wire is fitted correctly to the winch deflection roller.
16. Place the winch with two winding heads (2) in the vehicle.
• Position the winch near to the interior rear view mirror.
• Insert transfer ratchet and pre-tension cutting wire.
Note: In the area of the A-pillar/roof frame, increased cutting effort must be made.
17. Cut out windshield.
• Use the hold-down positioner and the plastic sheet to protect the sunroof.
• Arrow shows the path taken by the cutting wire (1).
• Cut out the windshield until the cutting wire is level with the winch.
Note: Ensure that the cutting wire is fitted correctly to the winch deflection roller.
18. Place the winch with one winding head in the vehicle.
• Position the winch with one winding head on the A-pillar on the driver's side (2).
• Attach the cutting wire (1) to the winch.
• Insert transfer ratchet and pre-tension cutting wire.
Note: Use lubricant on the winch deflection roller. More pulling force is required to cut the area around the A-pillar/bulkhead.
19. Cut out windshield.
• Arrow shows the path taken by the cutting wire.
• Cut out the windshield until the cutting wire is level with the winch.
• Use the plastic sheet for the protection of the armature board.
BODY SYSTEMS
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX