Chevrolet Cruze 2012 Manual page 1107

BACK TO CHAPTER INDEX
Frame and Underbody
16. Install the inlet and outlet hose (2) to the steering gear (3).
17. Install power steering gear inlet and outlet hose bolts (1) and tighten to 11 N·m (97 lb in).
18. Install the lower steering intermediate shaft (1) bolt and tighten to 34 N·m (25 lb ft).
19. Remove the support of the radiator and condenser.
20. Lower the vehicle on a hoist. Refer to
21. Install the tire and wheel assemblies. Refer to
22. Install the exhaust flexible pipe. Refer to
23. Install the front bumper fascia opening lower cover. Refer to
24. Install the engine splash shields. Refer to
25. Install the front compartment insulator, if equipped. Refer to
26. If replacing the frame, check the wheel alignment. Refer to
BODY REPAIR
Lifting and Jacking the Vehicle.
Tire and Wheel Removal and
Exhaust Flexible Pipe Replacement.
Front Bumper Fascia Opening Lower Cover
Front Compartment Splash Shield
Front Compartment Insulator
Wheel Alignment
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Installation.
Replacement.
Replacement.
Replacement.
Measurement.
TO MODEL INDEX
S e c tion 03