Chevrolet Cruze 2012 Manual page 1106

BACK TO CHAPTER INDEX
Frame and Underbody
11. Install the steering linkage tie rod. Tighten the steering linkage tie rod nut to 35 N·m (26 lb ft).
12. Install the lower ball joints to the steering knuckles. Refer to
13. Install the power steering fluid cooling pipe (3) to the frame, install the power steering fluid cooling pipe bolt (1) and clip in (2).
Tighten the power steering fluid cooling pipe bolt to 9 N·m (80 lb in).
14. Install the wheel speed sensor wiring harness (2) to the frame on both sides.
Install the wiring harness retainers (3) to the frame and the lower control arm.
15. Install the radiator wiring harness (1) to the frame.
Install the wiring harness retainers (4) to the frame.
BODY REPAIR
Lower Control Arm Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 03
TO MODEL INDEX