Chevrolet Cruze 2012 Manual page 1465

BACK TO CHAPTER INDEX
Front Suspension
Callout
Preliminary Procedure
1. Raise and support the vehicle. Refer to
2. Remove the wheel bearing and hub assembly. Refer to
3. Separate the outer tie rod end from the knuckle. Refer to
4. Remove the wheel bearing/hub. Refer to
1 Steering Knuckle Bolt (Qty: 2)
Steering Knuckle Nut (Qty: 2)
Caution:
2
Tighten
90 N·m(66 lb ft) + 60-70 degrees
3 Steering Knuckle
Lifting and Jacking the
Lower Control Arm
Refer to Fastener Caution in the Preface section.
SUSPENSION
Component Name
Vehicle.
Front Wheel Bearing and Hub
Steering Linkage Outer Tie Rod
Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Replacement.
Replacement.
TO MODEL INDEX
S e c tion 10