Chevrolet Cruze 2012 Manual page 1578

BACK TO MAIN INDEX
10. Using the CH-49376 holding wrench (1) with EN-956-1 extension (2).
11. Using a torque wrench and the appropriate size socket, tighten the wheel drive shaft nut to 150 N·m 111 (lb ft).
12. Release the wheel drive shaft nut (2) trough 45°.
13. Retighten the wheel drive shaft nut (2) to 250 N·m (185 lb ft).
14. Install the tire and wheel assembly. Refer to
15. Lower the vehicle.
16. Inspect the transaxle fluid level. Refer to
ADDITIONAL LINKS
Tire and Wheel Removal and
Transmission Fluid Check.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Installation.
TO MODEL INDEX
S e c tion 00