Chevrolet Cruze 2012 Manual page 1485

BACK TO CHAPTER INDEX
Rear Suspension
Special Tools
EN 45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
2. Remove the tire and wheel assembly. Refer to
3. Remove the brake drum. Refer to
4. Remove the plug from the drum brake actuator access hole in the backing plate. Using the access hole, install a heavy mechanic
wire (1) in order to support the brake backing plate.
5. Remove the wheel speed sensor bolt (2).
6. Remove the wheel speed sensor (1).
7. Remove the wheel bearing/hub mounting bolts (1).
SUSPENSION
Special Tools.
Lifting and Jacking the
Tire and Wheel Removal and
Brake Drum Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Vehicle.
Installation.
TO MODEL INDEX
S e c tion 10