Chevrolet Cruze 2012 Manual page 1065

BACK TO CHAPTER INDEX
Collision Repair
3. Position the rear bumper impact bar stud plate on the vehicle.
4. Verify the fit of the rear bumper impact bar stud plate.
5. Clamp the rear bumper impact bar stud plate into position.
6. Spot weld accordingly.
7. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
8. Paint the repaired area. Refer to
9. Install all related panels and components.
10. Connect the negative battery cable. Refer to
11. Enable the SIR system. Refer to
BODY REPAIR
Basecoat/Clearcoat Paint Systems.
Battery Negative Cable Disconnection and
SIR Disabling and Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Anti-Corrosion Treatment and
Connection.
TO MODEL INDEX
S e c tion 03
Repair.