Chevrolet Cruze 2012 Manual page 1416

BACK TO CHAPTER INDEX
Power Steering
Callout
Preliminary Procedure
Remove the tire and wheel assembly. Refer to
Steering Linkage Tie Rod Nut
Caution: Refer to
1
Tighten
35 N·m (26 lb ft)
Steering Linkage Inner Tie Rod Nut
2
Tighten
60 N·m (44 lb ft)
Steering Linkage Outer Tie Rod
Procedure
1. Use CH-161-B puller to separate the steering linkage outer tie rod from the steering knuckle.
2. Inspect the steering linkage inner tie rod for bent or damaged threads.
3. Clean the tapered surface of the steering knuckle.
3
4. Center the steering angle sensor. Refer to
5. Check and adjust wheel alignment. Refer to
Special Tools
CH-161-B Puller
For equivalent regional tools, refer to
Tire and Wheel Removal and
Fastener Caution in the Preface section.
Special Tools.
STEERING
Component Name
Installation.
Steering Angle Sensor Centering.
Wheel Alignment Measurement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 09
TO MODEL INDEX