Chevrolet Cruze 2012 Manual page 1456

BACK TO CHAPTER INDEX
Front Suspension
Special Tools
• CH 904 Underframe
• EN 45059 Torque Angle Sensor Kit
• CH 49289 Centering Adapter
For equivalent regional tools, refer to
Removal Procedure
1. Turn the front wheels to the straight forward position and secure the steering wheel from moving.
2. Remove the 2 lower steering intermediate shaft bolts (1).
3. Remove the steering intermediate shaft from the steering gear.
4. Raise and support the vehicle. Refer to
5. Remove the tire and wheel assemblies. Refer to
6. Remove the front compartment insulator, if equipped.
7. Remove the engine shield, if equipped.
8. Remove the exhaust flexible pipe. Refer to
9. Remove lower stabilizer link shaft nut (2) on both sides.
10. Remove stabilizer link shaft (1) from stabilizer shaft.
11. Remove stabilizer link shaft (1) from stabilizer.
SUSPENSION
Special Tools.
Lifting and Jacking the Vehicle
Tire and Wheel Removal and Installation
Exhaust Flexible Pipe
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Replacement.
TO MODEL INDEX
S e c tion 10