BACK TO CHAPTER INDEX
Rear Suspension
Special Tools
EN 45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to
Removal Procedure
1.
Raise and suitably support the vehicle. Refer to
2.
Remove the tire and wheel assembly. Refer to
3.
Remove the both brake hose bolts (1) attaching the hose to the rear brake caliper bracket.
4.
Remove rear parking brake cable bracket bolts (1) from the rear axle.
5.
Remove the wheel bearing/hub mounting bolts (1).
SUSPENSION
Special
Tools.
Lifting and Jacking the
Tire and Wheel Removal and
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Vehicle.
Installation.
TO MODEL INDEX
S e c tion 10