Chevrolet Cruze 2012 Manual page 1426

BACK TO CHAPTER INDEX
Power Steering
Note: The recess (2) of the fine toothing in the universal joint have to align precisely with the recess (1) of the fine toothing on the
steering pinion. The bore in the universal joint have to align with the groove on the steering pinion (3).
18. Check alignment of fine toothing of universal joint and steering pinion.
19. Install the lower intermediate steering shaft bolts and tighten to 34 N·m (26 lb ft).
20. Adjust the front toe. Refer to
21. Bleed the hydraulic steering system. Refer to
STEERING
Wheel Alignment - Steering Wheel Angle and/or Front Toe
Power Steering System
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Adjustment.
Bleeding.
TO MODEL INDEX
S e c tion 09