BACK TO CHAPTER INDEX
Front Suspension
Callout
Preliminary Procedure
1.
Raise and support the vehicle. Refer to
2.
Remove the front tire and wheel assemblies. Refer to
Stabilizer Shaft Link Nut (Qty: 2)
Caution:
Procedure
1
Discard the old stabilizer shaft link nut and use NEW ONLY.
Tighten
65 N·m (48 lb ft)
2
Stabilizer Shaft Link
Lifting and Jacking the
Refer to
Fastener Caution
in the Preface section.
SUSPENSION
Component Name
Vehicle.
Tire and Wheel Removal and
Installation.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
TO MODEL INDEX