Chevrolet Cruze 2012 Manual page 1424

BACK TO CHAPTER INDEX
Power Steering
14. Remove the front (1) and the rear (2) transmission mount bracket bolts.
15. Remove the rear frame to body bolts. Refer to drivetrain and front suspension frame replacement
Frame Replacement.
16. Lower the rear of the frame max. 50 mm (1.968 in) in order to gain clearance to the steering gear.
17. Remove and discard the steering gear bolts (1), nuts (3) and washers (2) from the steering gear.
18. Remove the steering gear.
Installation Procedure
1. Install the steering gear.
2. Install steering gear bolts (1), washers (2) and nuts (3) to the steering gear.
Caution: Refer to
3. Tighten the NEW steering gear bolts to 125 N·m (93 lb ft) + 160° , using the EN 45059 kit .
4. Raise the frame with hydraulic jack.
5. Install the rear frame to body bolts. Refer to drivetrain and front suspension frame replacement
Frame Replacement.
Fastener Caution in the Preface section.
STEERING
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 09
Drivetrain and Front Suspension
Drivetrain and Front Suspension
TO MODEL INDEX