Chevrolet Cruze 2012 Manual page 1005

BACK TO CHAPTER INDEX
Collision Repair
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.
Removal Procedure
Warning: Refer to
Warning: Refer to
Warning: Refer to
1. Disable the SIR System. Refer to
2. Disconnect the negative battery cable. Refer to
3. Remove all related panels and components.
4. Visually inspect the damage. Repair as much of the damage as possible.
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to
6. Create cut lines on the body lock pillar outer panel.
Note: Do not damage any inner panels or reinforcements.
7. Cut the panel where sectioning is to be performed.
8. Locate and mark all the necessary factory welds of the body lock pillar outer panel.
9. Drill all factory welds.
Approved Equipment for Collision Repair Warning
Collision Sectioning Warning in the Preface section.
Glass and Sheet Metal Handling Warning
SIR Disabling and
Battery Negative Cable Disconnection and
BODY REPAIR
in the Preface section.
in the Preface section.
Enabling.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Connection.
Anti-Corrosion Treatment and
TO MODEL INDEX
S e c tion 03
Repair.