Chevrolet Cruze 2012 Manual page 1458

BACK TO CHAPTER INDEX
Front Suspension
16. Position and set hydraulic lifter in connection with CH 904 frame and CH 49289-50 adapter (2) onto suspension frame (1). Bent
from cover beside.
17. Lower suspension frame max. 55 mm.
Note: In order to assure a correct installation of the insulators ONLY remove and install the insulators side by side! Dismantled
MUST BE discarded.
18. Remove and discard the two front stabilizer shaft insulator clamp bolts (1).
19. Remove the shaft insulator clamp (2).
Bend up clamp (2) slightly.
20. Mark the location of the insulator (1) to the stabilizer shaft (2).
21. Remove insulator (1) from stabilizer shaft (2).
Installation Procedure
1. Install NEW stabilizer shaft insulators (1) to stabilizer shaft (2) so that the slit in the insulator is facing the rear of the vehicle.
SUSPENSION
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
TO MODEL INDEX