Chevrolet Cruze 2012 Manual page 1576

BACK TO MAIN INDEX
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the
hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear
the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.
5. Using the CH-49400 remover (2), separate the brake rotor and wheel bearing/hub assembly (1).
6. Remove the outer tie rod assembly from the steering knuckle. Refer to
7. Remove the ball joint from the steering knuckle. Refer to
8. Using the CH-313 slide hammer (2) with CH-6003 remover (1) remove the wheel drive shaft (3) from the vehicle.
Installation Procedure
1. Install the DT-6332 protector into the differential output shaft seal.
ADDITIONAL LINKS
Steering Linkage Outer Tie Rod
Lower Control Arm Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 00
Replacement.
TO MODEL INDEX