BACK TO CHAPTER INDEX
Mirrors
Callout
Preliminary Procedure
1.
Remove the outside moisture cover. Refer to
2.
Adjust the mirror to the full upward position.
Inside Rearview Mirror Bolt
Caution:
1
Tighten
8 N·m (80 lb in)
Inside Rearview Mirror
2
Tip
Slide the mirror in an upward motion in order to remove.
Windshield Outside Moisture Sensor Cover Replacement
Refer to
Fastener Caution
in the Preface section.
BODY SY S T E M S
Component Name
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX