Chevrolet Cruze 2012 Manual page 1535

BACK TO CHAPTER INDEX
Heating, Ventilation and Air Conditioning
Callout
Preliminary Procedures
1. Recover the refrigerant. Refer to
2. Remove drive belt. Refer to
3. Raise and support the vehicle. Refer to
4. Disconnect the A/C compressor electrical connector.
5. Remove compressor hose assembly. Refer to
A/C Compressor Bolt (Qty: 3)
Caution: Refer to
1
Tighten
22 N·m (16 lbf ft)
A/C Compressor Assembly
Procedure
1. Use a low viscosity, poly-alkylene glycol (PAG) oil. Use of the incorrect oil can result in compressor failure.
2. When replacing the A/C compressor, balance the compressor oil. Refer to
2
3. Using GE 39400-A detector leak test A/C compressor fittings.
Special Tools
GE 39400-A Electronic Halogen Leak Detector
For equivalent regional tools, refer to
Refrigerant Recovery and
Drive Belt Replacement.
Lifting and Jacking the
Air Conditioning Compressor and Condenser Hose
Fastener Caution in the Preface section.
Special Tools.
HVAC SYSTEM
Component Name
Recharging.
Vehicle.
Air Conditioning Compressor Oil Balancing.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
Replacement.
...
TO MODEL INDEX