Chevrolet Cruze 2012 Manual page 1462

BACK TO CHAPTER INDEX
Front Suspension
Special Tools
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to
Removal Procedure
1. Raise and support the vehicle. Refer to
2. Remove the brake rotor. Refer to
3. Remove the wheel speed sensor screw (2).
4. Remove the wheel speed sensor (1) from the steering knuckle.
5. Remove the wheel drive shaft from the front wheel bearing/hub. Refer to front wheel drive shaft replacement
Shaft Replacement - Left Side
6. Remove and discard the front wheel bearing/hub bolts (1).
SUSPENSION
Special Tools.
Lifting and Jacking the
Front Brake Rotor Replacement.
and/or Front Wheel Drive Shaft Replacement - Right
Vehicle.
Side.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
Front Wheel Drive
TO MODEL INDEX