Chevrolet Cruze 2012 Manual page 1494

BACK TO CHAPTER INDEX
Rear Suspension
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
2. Support the rear axle with a tall jack stand near the shock absorber.
3. Remove the lower shock bolt. Refer to
4. Using the tall jack stands, slowly lower the rear axle in order to remove tension from the rear springs.
5. Remove the spring (1).
6. Remove the lower and upper rear spring insulators (1, 2).
Installation Procedure
Note: The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is
required.
1. Install the lower and upper rear spring insulators (1, 2).
SUSPENSION
Lifting and Jacking the
Shock Absorber Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Vehicle.
TO MODEL INDEX
S e c tion 10