Chevrolet Cruze 2012 Manual page 1211

BACK TO CHAPTER INDEX
Lighting
Callout
Preliminary Procedures
1. Remove the rear compartment sill trim plate. Refer to
2. Disconnect the electrical harness connector from the backup lamp socket.
Back Up Lamp Nut (Qty: 4)
Caution: Refer to
1
Tighten
5 N·m (44 lb ft)
Back Up Lamp Assembly
Warning: Refer to
Warning: Refer to
2
Procedure
1. Reach inside the rear compartment lid inner panel and remove the lower and upper retainer nuts securing the lamp
assembly to the outer rear compartment lid panel.
2. Push the inside edge of the lamp assembly outward from the rear outer compartment lid panel.
3. Remove and transfer the bulb socket from the back up lamp assembly.
Fastener Caution in the Preface section.
Glass and Sheet Metal Handling Warning
Halogen Bulb Warning in the Preface section.
BODY SY S T E M S
Component Name
Rear Compartment Sill Trim Plate
in the Preface section.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Replacement.
TO MODEL INDEX
S e c tion 04