Chevrolet Cruze 2012 Manual page 1275

BACK TO CHAPTER INDEX
Wipers and Washers
Removal Procedure
1. Open the hood.
2. Remove the windshield washer pump. Refer to
3. Using a small flat-bladed tool, remove the washer pump terminal seal (1) from the washer solvent container (2).
Installation Procedure
1. Position the washer pump terminal seal (1) to the washer solvent container (2), pressing in until fully seated.
2. Install the windshield washer pump. Refer to
3. Close the hood.
BODY SY S T E M S
Windshield Washer Pump Replacement
Windshield Washer Pump Replacement
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX