Chevrolet Cruze 2012 Manual page 1469

BACK TO CHAPTER INDEX
Front Suspension
Callout
Preliminary Procedure
1. Raise and support the vehicle. Refer to
2. Remove the tire and wheel. Refer to
3. Remove the lower control arm. Refer to
1 Lower Control Arm Rear Bushing Bolt
Lower Control Arm Rear Bushing
Caution:
Procedure
1. Discard Bushing Bolt and use NEW ONLY.
2 2. Tighten Bushing Bolt with vehicle standing on the ground.
Tighten
55 N·m (41 lb ft) +45-60 degrees
Special Tools
EN-45059 Torque Angle Sensor Kit . Refer to
Lifting and Jacking the
Tire and Wheel Removal and
Lower Control Arm
Refer to Fastener Caution in the Preface section.
SUSPENSION
Component Name
Vehicle.
Installation.
Replacement.
Special Tools.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
TO MODEL INDEX