BACK TO CHAPTER INDEX
Lighting
Callout
Preliminary Procedure
Remove the instrument panel lower trim pad cover. Refer to
Brake Pedal Position Sensor Bolt
Caution:
Refer to
1
Tighten
2 N·m (18 lb in)
Brake Pedal Position Sensor
Procedure
2
1.
Disconnect the electrical connector.
2.
Calibrate the brake pedal position sensor. Refer to
Fastener Caution
in the Preface section.
BODY SY S T E M S
Component Name
Instrument Panel Lower Trim Pad Cover
Brake Pedal Position Sensor Calibration.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
Replacement.
TO MODEL INDEX