BACK TO CHAPTER INDEX
Steering Column
Note: The recess (2) of the fine toothing in the universal joint have to align precisely with the recess (1) of the fine toothing on the
steering pinion. The bore in the universal joint has to align with the groove on the steering pinion (3).
2.
Push universal joint onto steering pinion carefully as desribed above inthe note.
Caution:
Refer to
3.
Install the 2 intermediate steering shaft bolts (1). Tighten the intermediate steering shaft bolts 34 N·m (25 lb ft).
Fastener Caution
in the Preface section.
STEERING
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 09
TO MODEL INDEX