Chevrolet Cruze 2012 Manual page 1496

BACK TO CHAPTER INDEX
Rear Suspension
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
2. Support the rear axle with a tall jack stand near the shock absorber.
3. Remove the lower shock bolt. Refer to
4. Using the tall jack stands, slowly lower the rear axle in order to remove tension from the rear springs.
5. Remove the spring (1).
6. Remove the upper spring seat/jounce bumper (1) from the spring, while leaving the lower spring seat on the axle.
Installation Procedure
1. Install the upper spring seat/jounce bumper (1) on the spring.
SUSPENSION
Lifting and Jacking the
Shock Absorber Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
Vehicle.
TO MODEL INDEX
S e c tion 10