Chevrolet Cruze 2012 Manual page 1528

..
BACK TO CHAPTER INDEX CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
SUSPENSION S e c tion 10
Wheel Alignment
Camber is the tilting of the wheels from the vertical when viewed from the front of the vehicle. When the wheels tilt outward at the top,
the camber is positive (+). When the wheel tilts inward at the top, the camber is negative (-). The amount of tilt is measured in degrees
from the vertical. Camber settings influence the directional control and the tire wear.
Too much positive camber will result in premature wear on the outside of the tire and cause excessive wear on the suspension parts.
Too much negative camber will result in premature wear on the inside of the tire and cause excessive wear on the suspension parts.
Unequal side-to-side camber of one degree or more will cause the vehicle to pull or lead to the side with the most positive camber.