Chevrolet Cruze 2012 Manual page 1452

BACK TO CHAPTER INDEX
Front Suspension
15. Position and set hydraulic lifter in connection with CH-904 frame and CH-49289-50 adapter (2) onto suspension frame (1). Pull
away front engine compartment cover slightly..
16. Lower suspension frame max. 55 mm.
17. Remove the 4 front stabilizer shaft insulator clam bolts (1).
18. Remove the stabilizer shaft.
Installation Procedure
1. Install the stabilizer shaft.
Caution: Refer to
2. Install the 4 front stabilizer shaft insulator clam bolts (1) and tighten to 22 N·m (17 lb ft) plus 30 degrees.
3. Move out the positioning pins (1) of CH 49289 adapter .
Fastener Caution in the Preface section.
SUSPENSION
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 10
TO MODEL INDEX