Chevrolet Cruze 2012 Manual page 1142

Hide thumbs Also See for Cruze 2012:
Table of Contents

Advertisement

BACK TO CHAPTER INDEX
Fixed and Movable Windows
Callout
Warning:
Refer to
Glass and Sheet Metal Handling Warning
Warning:
Refer to
Express Window Down Warning
Preliminary Procedure
1.
Remove the front side door trim. Refer to
2.
Remove the water deflector. Refer to
Front Side Door Window Regulator Sash Nut (Qty: 2)
Caution:
Refer to
1
Tighten
10 N·m (89 lb in)
Front Side Door Window
Procedure
1.
Loosen the window regulator sash nuts.
2.
Connect the door trim panel wire connector.
2
Note: Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the
window for adjustment.
3.
Start the vehicle.
4.
Using the power window switch, raise the window to the full up position.
5.
Tighten the front side door window regulator sash nuts.
6.
Inspect for proper window operation and a tight seal.
7.
Shut off the vehicle.
in the Preface section.
Front Side Door Trim
Front Side Door Water Deflector
Fastener Caution
in the Preface section.
BODY SYSTEMS
Component Name
in the Preface section.
Replacement.
Replacement.
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
S e c tion 04
TO MODEL INDEX

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents