Vehicle Controls; Ignition Switch; Shift Lever; Horn Switch - Taylor-Dunn BG-015-00 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

Ignition Switch

An ignition switch, located on the right center side of the instrument
panel, starts the engine. Refer to
for this switch.
The ignition switch should be in the "OFF" position whenever the operator
leaves the vehicle.
This switch is also designed to secure and disable the vehicle. The key
can only be removed when the ignition switch is in the "OFF" position.

Shift Lever

The shift lever is located between the driver and front passenger seats.
The shift lever locks into the position selected. Push the knob down to
unlock the lever, and move the lever into the desired direction, forward
to shift into the forward direction or pull back to shift into the reverse
direction. The center position is neutral. Allow the vehicle to come to a
complete stop before shifting gears.

Horn Switch

The horn switch is located on the right side of the instrument panel.
Depress the switch to sound the horn, release it to turn it off.

Headlight Switch

The headlight switch is located on the top left of the instrument panel.
Push the right side of the switch to turn the lights on. Push the left side
of the switch to turn the light off.

Accessory Switch (Optional)

The accessory switch is located on the left side of the instrument panel
and to the right of the headlight switch. Push the top of the switch to turn
on the accessory. Push the bottom of switch to turn off the accessory.
The accessory can be turned on with the key switch in the "OFF" position.
If a vehicle is equipped with windshield wipers and one or more
accessories, the windshield wipers are controlled from this switch. Other
accessories are controlled from the auxiliary switch.
Safety Rules Page 5
Starting
in this section for instructions