Session Reset Of Specific Route; Session Reset Of External Peer - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
10.1.5.3
i
10.1.5.4
A50010-Y3-C150-2-7619
Command
clear ip bgp <1-65535> soft [ in |
out ]
clear ip bgp <1-65535> ipv4
{ unicast | multicast } soft [ in |
out ]

Session Reset of Specific Route

To reset the sessions of BGP neighboring router with specified IP address, use the follow-
ing command.
Command
clear ip bgp ROUTE-IP-
ADDRESS
See Section 10.1.5.1 when you configure the detail parameters.
To reset the sessions of BGP neighboring router with specified IP address and initialize
the details of route configurations, use the following command.
Command
clear ip bgp A.B.C.D in [ prefix-
filter ]
clear ip bgp A.B.C.D ipv4 { uni-
cast | multicast } in [ prefix-filter ]
clear ip bgp A.B.C.D out
clear ip bgp A.B.C.D ipv4 { uni-
cast | multicast } out
clear ip bgp A.B.C.D soft [ in |
out ]
clear ip bgp A.B.C.D ipv4 { uni-
cast | multicast } soft [ in | out ]

Session Reset of External Peer

You can reset the session of BGP router connected to external AS. To reset a BGP con-
nection for all external peers, use the following command.
Command
clear ip bgp external
Mode
Updates the route information only while the session is
possible of BGP neighboring routers which are config-
Global ured a particular AC number. Apply the route either
incoming or outgoing routes.
1-65535: AS number
Mode
Resets the sessions of BGP neighboring router with
Global
specified IP address.
Mode
Resets the session of BGP neighboring router con-
tained specified IP address.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
A.B.C.D: route IP address
Resets the session of BGP neighboring router with
specified IP address.
Global
A.B.C.D: route IP address
out: clears outgoing advertised routes.
unicast | multicast: address family modifier
Updates the route information only while the session is
possible of BGP neighboring router with specified IP
address. Apply the route either incoming or outgoing
routes.
A.B.C.D: route IP address
Mode
Global Resets the session of all external AS peers.
UMN:CLI
Description
Description
Description
Description
329