Configuring Authentication Mode - Siemens S223 User Manual

UMN:CLI
i
4.5.1.3
i
66
After default server is designated, all requests start from the RADIUS server. If there's no
response from default server again, the authentication request is tried for RADIUS server
designated as next one.
To configure IP address of RADIUS server and key value, use the following command.
Command
dot1x radius-server host {IP-
ADDRESS | NAME} auth-port <0-
65535> key KEY
dot1x radius-server host {IP-
ADDRESS | NAME} key KEY
no dot1x radius-server host {IP-
ADDRESS | NAME}
You can designate up to 5 RADIUS servers as authenticator.
The key is authentication information between the authenticator and RADIUS server. The
authenticator and RADIUS server must have a same key value, and you can use alpha-
betic characters and numbers for the key value. The space or special character is not al-
lowed.
You can configure the priority for the radius server that have configured by user.
Command
dot1x radius-server move {IP-
ADDRESS | NAME} priority PRI-
ORITY

Configuring Authentication Mode

You can change the authentication mode from the port-based to the MAC-based. To
change the authentication mode, use the following command.
Command
dot1x auth-mode mac-base
PORTS
no dot1x auth-mode mac-base
PORTS
Before setting the authentication mode to the MAC-based, you need to set a MAC filtering
policy to deny them for all the Ethernet ports. To configure a MAC filtering policy, see Sec-
tion 7.12.1
SURPASS hiD 6615 S223/S323 R1.5
Mode
Registers RADIUS server with key value and UDP port
of radius server.
IP-ADDRESS: Ip address of radius server
NAME: host name
0-65535: UDP port number
Global
KEY: the value of key
Configures IP address of RADIUS server and key
value.
Deletes a registered RADIUS server.
Mode
Configures the priority of radius server.
Global
IP-ADDRESS: Ip address of radius server
NAME: host name
Mode
Sets the authentication mode to the MAC-based.
Global
Restores the authentication mode to the port-based.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619