Syslog; Syslog Output Level - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.5
7.5.1
A50010-Y3-C150-2-7619

Syslog

The syslog is a function that allows the network element to generate the event notification
and forward it to the event message collector like a syslog server. This function is enabled
as default, so even though you disable this function manually, the syslog will be enabled
again.
This section contains the following contents.

Syslog Output Level

•
Facility Code
•
Syslog
•
Disabling Syslog
•
Displaying Syslog Message
•
• Displaying Syslog Configuration
Syslog Output Level
Syslog Output Level without a Priority
To set a syslog output level, use the following command.
Command
syslog output { emerg | alert | crit
| err | warning | notice | info |
debug } console
syslog output { emerg | alert | crit
| err | warning | notice | info |
debug } local { volatile | non-
volatile }
syslog output { emerg | alert | crit
| err | warning | notice | info |
debug } remote IP-ADDRESS
To disable a specified syslog output, use the following command.
Command
no syslog output { emerg | alert |
crit | err | warning | notice | info |
debug } console
no syslog output { emerg | alert |
crit | err | warning | notice | info |
debug } local { volatile | non-
volatile }
no syslog output { emerg | alert |
crit | err | warning | notice | info |
debug } remote IP-ADDRESS
Mode
Generates a syslog message of selected level or
higher and forwards it to the console.
Generates a syslog message of selected level or
higher in the system memory.
Global
volatile: deletes a syslog message after restart.
non-volatile: reserves a syslog message.
Generates a syslog message of selected level or
higher and forwards it to a remote host.
Mode
Global Deletes a specified syslog output.
UMN:CLI
Description
Description
135