Siemens S223 User Manual page 122

UMN:CLI
122
The following is to configure to enable OAM loopback function through 25 port of the
switch and operate once.
SWITCH(bridge)# oam local admin enable 25
SWITCH(bridge)# oam remote loopback enable 25
SWITCH(bridge)# show oam local 25
LOCAL PORT[25]
-------------------------------------------
item
-------------------------------------------
admin
mode
mux action
par action
variable
link event
loopback
uni-direction
-------------------------------------------
SWITCH(bridge)# show oam remote 25
REMOTE PORT[25]
-------------------------------------------
item
-------------------------------------------
mode
MAC address
variable
link event
loopback
uni-direction
-------------------------------------------
SWITCH(bridge)# oam remote loopback start 25
PORT[25]: The remote DTE loopback is success.
SWITCH(bridge)#
| value
| ENABLE
| ACTIVE
| FORWARD
| DISCARD
| UNSUPPORT
| UNSUPPORT
| SUPPORT(disable)
| UNSUPPORT(disable)
| value
| ACTIVE
| 00:d0:cb:27:00:94
| UNSUPPORT
| UNSUPPORT
| SUPPORT(enable)
| UNSUPPORT
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619
User Manual